Air Jet velvet Loom
The strong and tough frame is formed by the new wall boards at both sides and 4 pieces of cross beams. The middle supports under the beams have further strengthened the vi bration resistance and the heavy machine body has laid a solid foundation for the machine with the high speed and low noise.
PRODUCT DESCRIPTION
BOX-type wallboard structure
The strong and tough frame is formed by the new wall boards at both sides and 4 pieces of cross beams. The middle supports under the beams have further strengthened the vi bration resistance and the heavy machine body has laid a solid foundation for the machine with the high speed and low noise.
unified Lubricating system
Main transmission parts (Casing Parts) is lubricated by oil bat h and others are lubricated by centralized oil-supplying system.Automatic oil-supplying device can automatically lubricate equipment by the instructions on display.
Main motor Direct drive motor(optional)
Successfully used direct drive technology of new energy vehicle on HYCDairjet loom,achieved progressive improvement. Weaver can adjust the function of multi weft density and speed in touch screen. The rotor of directdrive motor is made of permanent magnet material, so there is no rotorresistance and hysteresis loss in normal operation, Therefore, the motorhas high efficiency, large starting torque and obvious energy saving effect.
Beating-up Mechanism with High Speed Adaptability
Narrow Fabric Loom adopts 4-bar linkage beating- up mechanism with highspeed adaptability. lt has short beating- up stroke and sma ll vibration when it runs at high speed so that it can beat up forcefully and steadily. Broad Loom adopts 6-bar linkage beating- up mechanism with longer post-center stillness ti me in order to improve the steady weft running.
Dobby Shedding: Max 16 Heald Frames (Optional)Suitable for versatile plain, twill, satin and small jacquard weave with high additional value.
Jacquard shedding (optional)
stablecloth Fell
In-head Temple
It's easy to install and take down the in-headtemple loom with raked cloth fell as it adopts up to down pressing way. The cloth-leading board and the front end of temple bar a re inserted into the air-conducting part of steel reed, so it's conducive to the stability of cloth fe ll and more obviously effect can be achieved when it is applied for warp weave, double weave, jacquard weave and high density weave.
Optimization of Beating-up Angle
Computer simulation analysis optimizes the beating-up angle and strokeangle B, and enhances the beating-upforce tomake it more suitable for weaving thick and heavy fabric.
Product Configuration Table
|
ITEM |
Specifications |
Options |
|
|
Reed Space |
Nominal Reed Space(cm) |
170190 |
|
|
Useful Reed Space(cm) |
125-150(Nominal Reed Width:170cm、190cm) |
|
|
|
Weaving Range |
|
Filament:40D-200D |
|
|
Weft Selecting |
|
1,2,4,or6Jetting-Selection |
|
|
POWER |
Starting Way |
Direct Drive Motor(ECO-Friendly, High Effeciency,Automatic Transmission) |
|
|
3-Phase Motor |
|
||
|
Rated Power of Motor |
3.7Kw 4.5Kw |
|
|
|
Weft Insertion |
|
Main Nozzle,Assistant Main Nozzles together with Assistant Nozzles |
Extended Nozzles |
|
Profiled Reed |
|
||
|
Auto-Control of Weft Insertion |
|
||
|
Length Mesuring Weft Feeder |
Electriclly-Controlled Weft Feeder |
ABS Weft Insertion Brake |
|
|
Shedding |
|
Electronic Dobby Shedding:MAX14 Heald Frames |
|
|
|
Positive Cam Shedding:MAX12 Heald Frames |
|
|
|
Let-off |
|
Double Back Rest Electrically-Controlled Let-off(Double Beam) |
|
|
|
Positive Loose Warp |
|
|
|
Flanges Diameter |
800mm,914mm,1000mm |
|
|
|
|
|
Elecrtonic Take-up |
|
|
Take-up |
Maximum Take-up Diameter |
600mm;800mm Front Mounted Type600mm;Rear-Mounted Type800mm |
|
|
Weft Density |
3-80pieces/inch |
|
|
|
Cloth Length |
Keyboard Display(Meter,Yard)with the function of length-control |
|
|
|
Temple |
Short ring type left and right;hot knife left and right |
|
|
|
Beating-up |
|
4-bar Linkage Beating-up,6-bar Linkage Beating-up |
|
|
Weft Frame |
|
Floor 2 Cheeses(1 Jetting Selection);Floor 4 |
|
|
Leno |
|
Magnetic Type Selvedge Mechanism |
|
|
Waste Selvedge Trimming |
|
Cone Pulley Type |
|
|
Weft Cutting |
|
Electronic Scissors or Hot Knives |
|
|
Lubrication |
|
Main Transmission Parts are Lubricated by Oil Bath and Manually- |
Automatically Centralized Oil-Supply |
|
Stop Device |
Weft Stop |
Photoelectric Weft Feeler with Double Probes |
|
|
Warp Stop |
8-line Warp Stop Sheet |
|
|
|
Others |
Dropper Stop For Broken yarn |
|
|
|
Stop Cause Display |
Information Shows on Display Screen with 4 Color stop Indicators |
|
|
|
Others |
|
Broken Weft Searcher;Automatically Search Shedding |
|
|
|
Automatic Jetting Control |
|
|
|
|
Infrared Safe Protective Feeler |
|
|
|
|
|
Recommended Products
OEM/ODM Processing Services
Here, we provide a convenient online inquiry service. You only need to briefly fill in the following information, and our sales team will provide you with a detailed quotation within 24 hours.
Whether your needs are a single product or a complete set of customized solutions, we will provide tailored quotations and technical support according to your specific requirements.
Get a Free Consultancy
Dedicated to customer-centric service, committed to exceeding expectations, and succeeding together.
CONTACT
Add: Le'an Village Xinshi Town, Deqing Industrial Area, Huzhou City,Zhejiang Province, China
GET A CUSTOMIZED QUOTE
Here, we provide a convenient online inquiry service. You only need to briefly fill in the following information, and our sales team will provide you with a detailed quotation within 24 hours.
Whether your needs are a single product or a complete set of customized solutions, we will provide tailored quotations and technical support according to your specific requirements.